Logo Search packages:      
Sourcecode: wacom-tools version File versions

wacom.c

/*
 * $Id: wacom.c,v 1.8 2004/11/06 04:55:03 pingc Exp $
 *
 *  Copyright (c) 2000-2002 Vojtech Pavlik  <vojtech@suse.cz>
 *  Copyright (c) 2000 Andreas Bach Aaen    <abach@stofanet.dk>
 *  Copyright (c) 2000 Clifford Wolf        <clifford@clifford.at>
 *  Copyright (c) 2000 Sam Mosel            <sam.mosel@computer.org>
 *  Copyright (c) 2000 James E. Blair       <corvus@gnu.org>
 *  Copyright (c) 2000 Daniel Egger         <egger@suse.de>
 *  Copyright (c) 2001 Frederic Lepied      <flepied@mandrakesoft.com>
 *  Copyright (c) 2002 Christer Nilsson     <christer.nilsson@kretskompaniet.se>
 *  Copyright (c) 2002-2004 Ping Cheng      <pingc@wacom.com>
 *  Copyright (c) 2002 John Joganic         <john@joganic.com>
 *
 *  USB Wacom Graphire and Intuos tablet support
 *
 *  Sponsored by SuSE
 *
 *  ChangeLog:
 *      v0.1 (vp)  - Initial release
 *      v0.2 (aba) - Support for all buttons / combinations
 *      v0.3 (vp)  - Support for Intuos added
 *    v0.4 (sm)  - Support for more Intuos models, menustrip
 *                relative mode, proximity.
 *    v0.5 (vp)  - Big cleanup, nifty features removed,
 *                they belong in userspace
 *    v1.8 (vp)  - Submit URB only when operating, moved to CVS,
 *                use input_report_key instead of report_btn and
 *                other cleanups
 *    v1.11 (vp) - Add URB ->dev setting for new kernels
 *    v1.11 (jb) - Add support for the 4D Mouse & Lens
 *    v1.12 (de) - Add support for two more inking pen IDs
 *    v1.14 (vp) - Use new USB device id probing scheme.
 *               Fix Wacom Graphire mouse wheel
 *    v1.18 (vp) - Fix mouse wheel direction
 *               Make mouse relative
 *      v1.20 (fl) - Report tool id for Intuos devices
 *                 - Multi tools support
 *                 - Corrected Intuos protocol decoding (airbrush, 4D mouse, lens cursor...)
 *                 - Add PL models support
 *             - Fix Wacom Graphire mouse wheel again
 *    v1.21 (vp) - Removed protocol descriptions
 *             - Added MISC_SERIAL for tool serial numbers
 *          (gb) - Identify version on module load.
 *    v1.21.1 (fl) - added Graphire2 support
 *    v1.21.2 (fl) - added Intuos2 support
 *                 - added all the PL ids
 *    v1.21.3 (fl) - added another eraser id from Neil Okamoto
 *                 - added smooth filter for Graphire from Peri Hankey
 *                 - added PenPartner support from Olaf van Es
 *                 - new tool ids from Ole Martin Bjoerndalen
 *    v1.29   (pc) - Add support for more tablets
 *                 - Fix pressure reporting
 *    v1.30   (vp) - Merge 2.4 and 2.5 drivers
 *                 - Since 2.5 now has input_sync(), remove MSC_SERIAL abuse
 *                 - Cleanups here and there
 *
 *   WARNING: THIS IS NOT PART OF THE OFFICIAL KERNEL TREE
 *   THIS IS FOR TESTING PURPOSES
 *
 *    v1.21.3-j0   - fixed absolute x and y for intuos by John Joganic
 *    v1.21.3-j1   - applied Christer Nilsson's patches for 2.4.20
 *    v1.30.1-j0   - applied Ping Cheng's patches for device ranges and caps
 *    v1.30.1-j1   - updated device ranges for Intuos2 12x12 (0x44)
 *    v1.30.1-j2   - updated device ranges for Intuos2 6x8 (0x42)
 *    v1.30-j0.3.1 - fixed pen identifers, 2D mouse handling
 *    v1.30-j0.3.3 - added volito, thanks to Pasi Savolainen; fixed wheel sign
 *    v1.30-j0.3.4 - added Ping Cheng's new tool IDs
 *    v1.30-j0.3.5 - thread for resetting tablet on bad report
 *    v1.30-j0.3.6 - fixed volito ranges, thanks to Pasi Savolainen
 *    v1.30-j0.3.7 - unknown reports are now info, rather than error
 *    v1.30-j0.3.8 - fixed I2 4x5 Y max value, thanks to John New
 *                   fixed Intuos and Intuos2 sizes, values from Wacom
 *    v1.30-j0.5.0 - new release
 *    v1.30-j0.5.1 - fixed serial number code for Intuos and Intuos2
 *    v1.30-j0.5.2 - applied Ping Cheng's eraser patch for PL
 *    v1.30-j0.5.3 - reapplied patch for Intuos2 6x8's reportings as (0x47)
 *    v1.30-j0.6.0 - new release
 *    v1.30-j0.6.1 - new release
 *    v1.30-j0.6.2 - new release
 *    v1.30-j0.6.3 - new release
 *    v1.30-j0.6.4 - new release
 *    v1.30-j0.6.5 - added Intuos3
 *    v1.30-j0.6.6 - new release
 */

/*
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */

#include <linux/autoconf.h>
#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS)
#   define MODVERSIONS
#endif

#ifdef MODVERSIONS
#include <linux/modversions.h>
#endif

#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/usb.h>
#include <linux/smp_lock.h>
#include <linux/list.h>

/*
 * Version Information
 */
#define DRIVER_VERSION "v1.30-j0.6.6"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@suse.cz>"
#ifndef __JEJ_DEBUG
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver (LINUXWACOM)"
#else
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver (LINUXWACOM-DEBUG)"
#endif

MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");

#define USB_VENDOR_ID_WACOM   0x056a

static int kwacomd_pid = 0;               /* PID of kwacomd */
static DECLARE_COMPLETION(kwacomd_exited);
static DECLARE_WAIT_QUEUE_HEAD(kwacomd_wait);
static LIST_HEAD(wacom_event_list);   /* List of tablets needing servicing */
static spinlock_t wacom_event_lock = SPIN_LOCK_UNLOCKED;

struct wacom_features {
      char *name;
      int pktlen;
      int x_max;
      int y_max;
      int pressure_max;
      int distance_max;
      void (*irq)(struct urb *urb);
      unsigned long evbit;
      unsigned long absbit;
      unsigned long relbit;
      unsigned long btnbit;
      unsigned long digibit;
};

struct wacom {
      signed char data[10];
      struct input_dev dev;
      struct usb_device *usbdev;
      struct urb irq;
      struct wacom_features *features;
      int tool[2];
      int open;
      __u32 serial[2];
      
      struct list_head event_list;
      struct semaphore kwacomd_sem;
      unsigned int ifnum;
};

static void wacom_request_reset(struct wacom* wacom)
{
      unsigned long flags;
      spin_lock_irqsave(&wacom_event_lock, flags);
      if (list_empty(&wacom->event_list))
      {
            list_add(&wacom->event_list, &wacom_event_list);
            wake_up(&kwacomd_wait);
      }
      spin_unlock_irqrestore(&wacom_event_lock, flags);
}

static void wacom_pl_irq(struct urb *urb)
{
      struct wacom *wacom = urb->context;
      unsigned char *data = wacom->data;
      struct input_dev *dev = &wacom->dev;
      int prox, pressure;

      if (urb->status) return;

      if (data[0] != 2 && data[0] != 5)
      {
            printk(KERN_INFO "wacom_pl_irq: received unknown report #%d\n", data[0]);
            wacom_request_reset(wacom);
            return;
      }
      
      /* proximity and pressure */
      prox = data[1] & 0x40;
            
      if (prox) {
              pressure = (signed char) ((data[7] <<1 ) | ((data[4] >> 2) & 1));
            if ( wacom->features->pressure_max > 350 ) {
                pressure = (pressure << 1) | ((data[4] >> 6) & 1);
                } 
            pressure += (( wacom->features->pressure_max + 1 )/ 2);

            /*
             * if going from out of proximity into proximity select between the eraser
             * and the pen based on the state of the stylus2 button, choose eraser if
             * pressed else choose pen. if not a proximity change from out to in, send
             * an out of proximity for previous tool then a in for new tool.
             */
            if (!wacom->tool[0]) {
                  /* Going into proximity select tool */
                  wacom->tool[1] = (data[4] & 0x20)? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
            }
            else {
                  /* was entered with stylus2 pressed */
                  if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20) ) {
                        /* report out proximity for previous tool */
                        input_report_key(dev, wacom->tool[1], 0);
                        input_event(dev, EV_MSC, MSC_SERIAL, 0);
                        wacom->tool[1] = BTN_TOOL_PEN;
                        return;
                  }
            }
            if (wacom->tool[1] != BTN_TOOL_RUBBER) {
                  /* Unknown tool selected default to pen tool */
                  wacom->tool[1] = BTN_TOOL_PEN;
            }
            input_report_key(dev, wacom->tool[1], prox); /* report in proximity for tool */

            input_report_abs(dev, ABS_X, data[3] | ((__u32)data[2] << 7) | ((__u32)(data[1] & 0x03) << 14));
            input_report_abs(dev, ABS_Y, data[6] | ((__u32)data[5] << 7) | ((__u32)(data[4] & 0x03) << 14));
            input_report_abs(dev, ABS_PRESSURE, pressure);
            input_report_key(dev, BTN_TOUCH, data[4] & 0x08);
            input_report_key(dev, BTN_STYLUS, data[4] & 0x10);
            /* Only allow the stylus2 button to be reported for the pen tool. */
            input_report_key(dev, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20));
      }
      else {
            /* report proximity-out of a (valid) tool */
            if (wacom->tool[1] != BTN_TOOL_RUBBER) {
                  /* Unknown tool selected default to pen tool */
                  wacom->tool[1] = BTN_TOOL_PEN;
            }
            input_report_key(dev, wacom->tool[1], prox);
      }

      wacom->tool[0] = prox; /* Save proximity state */
      /* end of proximity code */
      
      input_event(dev, EV_MSC, MSC_SERIAL, 0);
}

static void wacom_ptu_irq(struct urb *urb)
{
      struct wacom *wacom = urb->context;
      unsigned char *data = wacom->data;
      struct input_dev *dev = &wacom->dev;

      if (urb->status) return;

      if (data[0] != 2 && data[0] != 5)
      {
            printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]);
            wacom_request_reset(wacom);
            return;
      }
      
      if (data[1] & 0x04) 
      {
            input_report_key(dev, BTN_TOOL_RUBBER, data[1] & 0x20);
            input_report_key(dev, BTN_TOUCH, data[1] & 0x08);
      }
      else
      {
            input_report_key(dev, BTN_TOOL_PEN, data[1] & 0x20);
            input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
      }
      input_report_abs(dev, ABS_X, data[3] << 8 | data[2]);
      input_report_abs(dev, ABS_Y, data[5] << 8 | data[4]);
      input_report_abs(dev, ABS_PRESSURE, (data[6]|data[7] << 8));
      input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
      input_report_key(dev, BTN_STYLUS2, data[1] & 0x10);

      input_event(dev, EV_MSC, MSC_SERIAL, 0);
}


static void wacom_penpartner_irq(struct urb *urb)
{
      struct wacom *wacom = urb->context;
      unsigned char *data = wacom->data;
      struct input_dev *dev = &wacom->dev;
      int leftmb = (((signed char)data[6] > -80) && !(data[5] &0x20));

      if (urb->status) return;

      if (data[0] != 2 && data[0] != 5)
      {
            printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]);
            wacom_request_reset(wacom);
            return;
      }

      input_report_key(dev, BTN_TOOL_PEN, 1);
      input_report_abs(dev, ABS_X, data[2] << 8 | data[1]);
      input_report_abs(dev, ABS_Y, data[4] << 8 | data[3]);
      input_report_abs(dev, ABS_PRESSURE, (signed char)data[6] + 127);
      input_report_key(dev, BTN_TOUCH, leftmb);
      input_report_key(dev, BTN_STYLUS, (data[5] & 0x40));

      input_event(dev, EV_MSC, MSC_SERIAL, leftmb);
}

static void wacom_graphire_irq(struct urb *urb)
{
      struct wacom *wacom = urb->context;
      unsigned char *data = wacom->data;
      struct input_dev *dev = &wacom->dev;
      int x, y;

      if (urb->status) return;

      if (data[0] != 2 && data[0] != 5 )
      {
            printk(KERN_INFO "wacom_graphire_irq: received unknown report #%d\n", data[0]);
            wacom_request_reset(wacom);
            return;
      }
      
      x = data[2] | ((__u32)data[3] << 8);
      y = data[4] | ((__u32)data[5] << 8);

      switch ((data[1] >> 5) & 3) {

            case 0:     /* Pen */
                  input_report_key(dev, BTN_TOOL_PEN, data[1] & 0x80);
                  break;

            case 1: /* Rubber */
                  input_report_key(dev, BTN_TOOL_RUBBER, data[1] & 0x80);
                  break;

            case 2: /* Mouse with wheel */
                  input_report_key(dev, BTN_MIDDLE, data[1] & 0x04);
                  input_report_rel(dev, REL_WHEEL, (signed char) data[6]);
                  /* fall through */

            case 3: /* Mouse without wheel */
                  input_report_key(dev, BTN_TOOL_MOUSE, data[7] > 24);
                  input_report_key(dev, BTN_LEFT, data[1] & 0x01);
                  input_report_key(dev, BTN_RIGHT, data[1] & 0x02);
                  input_report_abs(dev, ABS_DISTANCE, data[7]);

                  input_report_abs(dev, ABS_X, x);
                  input_report_abs(dev, ABS_Y, y);

                  input_event(dev, EV_MSC, MSC_SERIAL, data[1] & 0x01);
                  return;
      }

      if (data[1] & 0x80) {
            input_report_abs(dev, ABS_X, x);
            input_report_abs(dev, ABS_Y, y);
      }

      input_report_abs(dev, ABS_PRESSURE, data[6] | ((__u32)data[7] << 8));
      input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
      input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
      input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);

      input_event(dev, EV_MSC, MSC_SERIAL, data[1] & 0x01);
}

static int wacom_intuos_inout(struct urb *urb)
{
      struct wacom *wacom = urb->context;
      unsigned char *data = wacom->data;
      struct input_dev *dev = &wacom->dev;
      int idx;

      /* tool number */
      idx = data[1] & 0x01;

      /* Enter report */
      if ((data[1] & 0xfc) == 0xc0)
      {
            /* serial number of the tool */
            wacom->serial[idx] = ((__u32)(data[3] & 0x0f) << 28) +
                        ((__u32)data[4] << 20) + ((__u32)data[5] << 12) +
                        ((__u32)data[6] << 4) + ((__u32)data[7] >> 4);

            #ifdef __JEJ_DEBUG
            printk(KERN_INFO "wacom_intuos_irq: tool change 0x%03X\n",
                        (((__u32)data[2] << 4) | (data[3] >> 4)));
            #endif

            switch ((((__u32)data[2] << 4) | (data[3] >> 4)))
            {
                  case 0x812: /* Intuos2 ink pen XP-110-00A */
                  case 0x801: /* Intuos3 Inking pen */
                  case 0x012: /* Inking pen */
                        wacom->tool[idx] = BTN_TOOL_PENCIL; break;

                  case 0x822: /* Intuos Pen GP-300E-01H */
                  case 0x852: /* Intuos2 Grip Pen XP-501E-00A */
                  case 0x842: /* Designer Pen */
                  case 0x823: /* Intuos3 Grip Pen */
                  case 0x813: /* Intuos3 Classic Pen */
                  case 0x885: /* Intuos3 Marker Pen */
                  case 0x022:
                        wacom->tool[idx] = BTN_TOOL_PEN; break;

                  case 0x832: /* Intuos2 stroke pen XP-120-00A */
                  case 0x032: /* Stroke pen */
                        wacom->tool[idx] = BTN_TOOL_BRUSH; break;

                  case 0x007: /* 2D Mouse */
                  case 0x09C: /* ?? Mouse - not a valid code according to Wacom */
                  case 0x094: /* 4D Mouse */
                  case 0x017: /* Intuos3 2D Mouse */
                        wacom->tool[idx] = BTN_TOOL_MOUSE; break;

                  case 0x096: /* Lens cursor */
                  case 0x097: /* Intuos3 Lens cursor */
                        wacom->tool[idx] = BTN_TOOL_LENS; break;

                  case 0x82A:
                  case 0x85A:
                  case 0x91A:
                  case 0xD1A:
                  case 0x0FA: /* Eraser */
                  case 0x82B: /* Intuos3 Grip Pen Eraser */
                  case 0x81B: /* Intuos3 Classic Pen Eraser */
                  case 0x91B: /* Intuos3 Airbrush Eraser */
                        wacom->tool[idx] = BTN_TOOL_RUBBER; break;

                  case 0x112: /* Airbrush */
                  case 0x912: /* Intuos2 Airbrush */
                  case 0xD12: /* Intuos Airbrush */
                  case 0x913: /* Intuos3 Airbrush */
                        wacom->tool[idx] = BTN_TOOL_AIRBRUSH; break;

                  default: /* Unknown tool */
                        wacom->tool[idx] = BTN_TOOL_PEN; break;
            }
            input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
            return 1;
      }

      /* Exit report */
      if ((data[1] & 0xfe) == 0x80)
      {
            input_report_key(dev, wacom->tool[idx], 0);
            input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
            return 1;
      }

      return 0;
}

static void wacom_intuos_general(struct urb *urb)
{
      struct wacom *wacom = urb->context;
      unsigned char *data = wacom->data;
      struct input_dev *dev = &wacom->dev;
      unsigned int t;

      /* general pen packet */
      if ((data[1] & 0xb8) == 0xa0)
      {
            t = ((__u32)data[6] << 2) | ((data[7] >> 6) & 3);
            input_report_abs(dev, ABS_PRESSURE, t);
            input_report_abs(dev, ABS_TILT_X,
                        ((data[7] << 1) & 0x7e) | (data[8] >> 7));
            input_report_abs(dev, ABS_TILT_Y, data[8] & 0x7f);
            input_report_key(dev, BTN_STYLUS, data[1] & 2);
            input_report_key(dev, BTN_STYLUS2, data[1] & 4);
            input_report_key(dev, BTN_TOUCH, t > 10);
      }

      /* airbrush second packet */
      if ((data[1] & 0xbc) == 0xb4)
      {
            input_report_abs(dev, ABS_WHEEL,
                        ((__u32)data[6] << 2) | ((data[7] >> 6) & 3));
            input_report_abs(dev, ABS_TILT_X,
                        ((data[7] << 1) & 0x7e) | (data[8] >> 7));
            input_report_abs(dev, ABS_TILT_Y, data[8] & 0x7f);
      }
      return;
}

static void wacom_intuos_irq(struct urb *urb)
{
      struct wacom *wacom = urb->context;
      unsigned char *data = wacom->data;
      struct input_dev *dev = &wacom->dev;
      unsigned int t;
      int idx;

      if (urb->status) return;

      /* check for valid report */
      if (data[0] != 2 && data[0] != 5 && data[0] != 6)
      {
            printk(KERN_INFO "wacom_intuos_irq: received unknown report #%d\n", data[0]);
            wacom_request_reset(wacom);
            return;
      }
      
      /* tool index */
      idx = data[1] & 0x01;

      /* process in/out prox events */
      if (wacom_intuos_inout(urb)) return;

      input_report_abs(dev, ABS_X, ((__u32)data[2] << 8) | data[3]);
      input_report_abs(dev, ABS_Y, ((__u32)data[4] << 8) | data[5]);
      input_report_abs(dev, ABS_DISTANCE, data[9]);

      /* process general packets */
      wacom_intuos_general(urb);
      
      /* 4D mouse, 2D mouse, or Lens cursor packets */
      if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0)
      {
            /* Rotation packet */
            if (data[1] & 0x02)
            {
                  t = ((__u32)data[6] << 3) | ((data[7] >> 5) & 7);
                  input_report_abs(dev, ABS_RZ, (data[7] & 0x20) ?
                        ((t - 1) / 2) : -t / 2);
            }

            /* 4D mouse packets */
            else if ((data[1] & 0x10) == 0)
            {
                  input_report_key(dev, BTN_LEFT,   data[8] & 0x01);
                  input_report_key(dev, BTN_MIDDLE, data[8] & 0x02);
                  input_report_key(dev, BTN_RIGHT,  data[8] & 0x04);
                  input_report_key(dev, BTN_SIDE,   data[8] & 0x20);
                  input_report_key(dev, BTN_EXTRA,  data[8] & 0x10);
                  /* JEJ - throttle is positive when rolled backwards */
                  t = ((__u32)data[6] << 2) | ((data[7] >> 6) & 3);
                  input_report_abs(dev, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
            }

            /* 2D mouse packets */  
            else if (wacom->tool[idx] == BTN_TOOL_MOUSE)
            {
                  /* JEJ - validated with 2D Intuos2 mouse */
                  input_report_key(dev, BTN_LEFT,   data[8] & 0x04);
                  input_report_key(dev, BTN_MIDDLE, data[8] & 0x08);
                  input_report_key(dev, BTN_RIGHT,  data[8] & 0x10);
                  /* JEJ - mouse wheel is positive when rolled backwards */
                  input_report_rel(dev, REL_WHEEL, (__u32)((data[8] & 0x02) >> 1)
                               - (__u32)(data[8] & 0x01));
            }

            /* lens cursor packets */
            else
            {
                  input_report_key(dev, BTN_LEFT,   data[8] & 0x01);
                  input_report_key(dev, BTN_MIDDLE, data[8] & 0x02);
                  input_report_key(dev, BTN_RIGHT,  data[8] & 0x04);
                  input_report_key(dev, BTN_SIDE,   data[8] & 0x10);
                  input_report_key(dev, BTN_EXTRA,  data[8] & 0x08);
            }
      }

      input_report_key(dev, wacom->tool[idx], 1);
      input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
}

static void wacom_intuos3_irq(struct urb *urb)
{
      struct wacom *wacom = urb->context;
      unsigned char *data = wacom->data;
      struct input_dev *dev = &wacom->dev;
      unsigned int t;
      int idx;

      if (urb->status) return;

      /* check for valid report */
      if (data[0] != 2 && data[0] != 5 && data[0] != 12)
      {
            printk(KERN_INFO "wacom_intuos3_irq: received unknown report #%d\n", data[0]);
            wacom_request_reset(wacom);
            return;
      }

      /* tool index is always 0 here since there is no dual input tool */
      idx = data[1] & 0x01;

      /* pad packets. Works as a second tool and is alway in prox */
      if (data[0] == 12)
      {
            /* initiate the pad as a device */
            if (wacom->tool[1] != BTN_TOOL_FINGER)
            {
                  wacom->tool[1] = BTN_TOOL_FINGER;
                  input_report_key(dev, wacom->tool[1], 1);
            }
            input_report_key(dev, BTN_0, (data[5] & 0x01));
            input_report_key(dev, BTN_1, (data[5] & 0x02));
            input_report_key(dev, BTN_2, (data[5] & 0x04));
            input_report_key(dev, BTN_3, (data[5] & 0x08));
            input_report_key(dev, BTN_4, (data[6] & 0x01));
            input_report_key(dev, BTN_5, (data[6] & 0x02));
            input_report_key(dev, BTN_6, (data[6] & 0x04));
            input_report_key(dev, BTN_7, (data[6] & 0x08));
            input_report_abs(dev, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
            input_report_abs(dev, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
            input_event(dev, EV_MSC, MSC_SERIAL, 0xffffffff);
            return;
      }

      /* process in/out prox events */
      if (wacom_intuos_inout(urb)) return;

      input_report_abs(dev, ABS_X, ((__u32)data[2] << 9) | ((__u32)data[3] << 1) | ((data[9] >> 1) & 1));
      input_report_abs(dev, ABS_Y, ((__u32)data[4] << 9) | ((__u32)data[5] << 1) | (data[9] & 1));
      input_report_abs(dev, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
      
      /* process general packets */
      wacom_intuos_general(urb);

      if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0)
      {
            /* Marker pen rotation packet. Reported as wheel due to valuator limitation */
            if (data[1] & 0x02)
            {
                  t = ((__u32)data[6] << 3) | ((data[7] >> 5) & 7);
                  t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
                        ((t-1) / 2 + 450)) : (450 - t / 2) ;
                  input_report_abs(dev, ABS_WHEEL, t);
            }

            /* 2D mouse packets */
            if (wacom->tool[idx] == BTN_TOOL_MOUSE)
            {
                  input_report_key(dev, BTN_LEFT,   data[8] & 0x04);
                  input_report_key(dev, BTN_MIDDLE, data[8] & 0x08);
                  input_report_key(dev, BTN_RIGHT,  data[8] & 0x10);
                  input_report_key(dev, BTN_SIDE,   data[8] & 0x40);
                  input_report_key(dev, BTN_EXTRA,  data[8] & 0x20);
                  /* mouse wheel is positive when rolled backwards */
                  input_report_rel(dev, REL_WHEEL, (__u32)((data[8] & 0x02) >> 1)
                               - (__u32)(data[8] & 0x01));
            }
      }

      input_report_key(dev, wacom->tool[idx], 1);
      input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
}

#define WACOM_GRAPHIRE_BITS   (BIT(EV_REL))
#define WACOM_GRAPHIRE_REL    (BIT(REL_WHEEL))
#define WACOM_INTUOS_TOOLS    (BIT(BTN_TOOL_BRUSH) | BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS))
#define WACOM_INTUOS3_TOOLS   (WACOM_INTUOS_TOOLS | BIT(BTN_TOOL_FINGER))
#define WACOM_INTUOS_BUTTONS  (BIT(BTN_SIDE) | BIT(BTN_EXTRA))
#define WACOM_INTUOS3_BUTTONS (WACOM_INTUOS_BUTTONS | BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7))
#define WACOM_INTUOS_BITS     (BIT(EV_REL))
#define WACOM_INTUOS_REL      (BIT(REL_WHEEL))
#define WACOM_INTUOS_ABS      (BIT(ABS_TILT_X) | BIT(ABS_TILT_Y) | BIT(ABS_RZ) | BIT(ABS_THROTTLE))
#define WACOM_INTUOS3_ABS     (WACOM_INTUOS_ABS | BIT(ABS_RX) | BIT(ABS_RY))

struct wacom_features wacom_features[] = {

      /* PenPartner */
      /*  0 */ { "Wacom Penpartner",         7,   5040,  3780,   255, 32,
                  wacom_penpartner_irq, 0, 0, 0, 0 },

      /* Graphire */
      /*  1 */ { "Wacom Graphire",       8,  10206,  7422,   511, 32,
                  wacom_graphire_irq, WACOM_GRAPHIRE_BITS, 0, WACOM_GRAPHIRE_REL, 0 },
      /*  2 */ { "Wacom Graphire2 4x5",  8,  10206,  7422,   511, 32,
                  wacom_graphire_irq, WACOM_GRAPHIRE_BITS, 0, WACOM_GRAPHIRE_REL, 0 },
      /*  3 */ { "Wacom Graphire2 5x7",  8,  13918, 10206,   511, 32,
                  wacom_graphire_irq, WACOM_GRAPHIRE_BITS, 0, WACOM_GRAPHIRE_REL, 0 },

      /* Intuos */
      /*  4 */ { "Wacom Intuos 4x5",    10,  12700, 10600,  1023, 15,
                  wacom_intuos_irq, WACOM_INTUOS_BITS, WACOM_INTUOS_ABS,
                  WACOM_INTUOS_REL, WACOM_INTUOS_BUTTONS, WACOM_INTUOS_TOOLS },
      /* JEJ - confirmed X and Y range from test tablet */
      /*  5 */ { "Wacom Intuos 6x8",    10,  20320, 16240,  1023, 15,
                  wacom_intuos_irq, WACOM_INTUOS_BITS, WACOM_INTUOS_ABS,
                  WACOM_INTUOS_REL, WACOM_INTUOS_BUTTONS, WACOM_INTUOS_TOOLS },
      /*  6 */ { "Wacom Intuos 9x12",   10,  30480, 24060,  1023, 15,
                  wacom_intuos_irq, WACOM_INTUOS_BITS, WACOM_INTUOS_ABS,
                  WACOM_INTUOS_REL, WACOM_INTUOS_BUTTONS, WACOM_INTUOS_TOOLS },
      /*  7 */ { "Wacom Intuos 12x12",  10,  30480, 31680,  1023, 15,
                  wacom_intuos_irq, WACOM_INTUOS_BITS, WACOM_INTUOS_ABS,
                  WACOM_INTUOS_REL, WACOM_INTUOS_BUTTONS, WACOM_INTUOS_TOOLS },
      /*  8 */ { "Wacom Intuos 12x18",  10,  45720, 31680,  1023, 15,
                  wacom_intuos_irq, WACOM_INTUOS_BITS, WACOM_INTUOS_ABS,
                  WACOM_INTUOS_REL, WACOM_INTUOS_BUTTONS, WACOM_INTUOS_TOOLS },

      /* PL - Cintiq */
      /*  9 */ { "Wacom PL400",          8,   5408,  4056,   255, 32,
                  wacom_pl_irq, 0,  0, 0, 0 },
      /* 10 */ { "Wacom PL500",          8,   6144,  4608,   255, 32,
                  wacom_pl_irq, 0,  0, 0, 0 },
      /* 11 */ { "Wacom PL600",          8,   6126,  4604,   255, 32,
                  wacom_pl_irq, 0,  0, 0, 0 },
      /* 12 */ { "Wacom PL600SX",        8,   6260,  5016,   255, 32,
                  wacom_pl_irq, 0,  0, 0, 0 },
      /* 13 */ { "Wacom PL550",          8,   6144,  4608,   511, 32,
                  wacom_pl_irq, 0,  0, 0, 0 },
      /* 14 */ { "Wacom PL800",          8,   7220,  5780,   511, 32,
                  wacom_pl_irq, 0,  0, 0, 0 },

      /* Intuos2 */
      /* JEJ - confirmed X and Y range from J.N. tablet */
      /* 15 */ { "Wacom Intuos2 4x5",   10,  12700, 10600,  1023, 15,
                  wacom_intuos_irq, WACOM_INTUOS_BITS, WACOM_INTUOS_ABS,
                  WACOM_INTUOS_REL, WACOM_INTUOS_BUTTONS, WACOM_INTUOS_TOOLS },
      /* JEJ - confirmed X and Y range from R.T. and J.S. tablets */
      /* 16 */ { "Wacom Intuos2 6x8",   10,  20320, 16240,  1023, 15,
                  wacom_intuos_irq, WACOM_INTUOS_BITS, WACOM_INTUOS_ABS,
                  WACOM_INTUOS_REL, WACOM_INTUOS_BUTTONS, WACOM_INTUOS_TOOLS },
      /* JEJ - values from serial 9x12 */
      /* 17 */ { "Wacom Intuos2 9x12",  10,  30480, 24060,  1023, 15,
                  wacom_intuos_irq, WACOM_INTUOS_BITS, WACOM_INTUOS_ABS,
                  WACOM_INTUOS_REL, WACOM_INTUOS_BUTTONS, WACOM_INTUOS_TOOLS },
      /* JEJ - confirmed X and Y range from J.J. tablet */
      /* 18 */ { "Wacom Intuos2 12x12", 10,  30480, 31680,  1023, 15,
                  wacom_intuos_irq, WACOM_INTUOS_BITS, WACOM_INTUOS_ABS,
                  WACOM_INTUOS_REL, WACOM_INTUOS_BUTTONS, WACOM_INTUOS_TOOLS },
      /* 19 */ { "Wacom Intuos2 12x18", 10,  45720, 31680,  1023, 15,
                  wacom_intuos_irq, WACOM_INTUOS_BITS, WACOM_INTUOS_ABS,
                  WACOM_INTUOS_REL, WACOM_INTUOS_BUTTONS, WACOM_INTUOS_TOOLS },
      /* Volito - (Graphire2 4x5 no mouse wheel) */
      /* 20 */ { "Wacom Volito",         8,   5104,  3712,   511, 32,
                  wacom_graphire_irq, WACOM_GRAPHIRE_BITS, 0, 0, 0 },
      /* 21 */ { "Wacom Graphire3 4x5",  8,   10208, 7424,   511, 32,
                  wacom_graphire_irq, WACOM_GRAPHIRE_BITS, 0, WACOM_GRAPHIRE_REL, 0 },
      /* 22 */ { "Wacom Graphire3 6x8",  8,   16704, 12064,  511, 32,
                  wacom_graphire_irq, WACOM_GRAPHIRE_BITS, 0, WACOM_GRAPHIRE_REL, 0 },
      /* 23 */ { "Wacom Cintiq Partner", 8,   20480,  15360, 511, 32,
                  wacom_ptu_irq, 0, 0, 0, 0 },
      /* Intuos3 */
      /* 24 */ { "Wacom Intuos3 4x5",   10,  25400, 20320,  1023, 15,
                  wacom_intuos3_irq, WACOM_INTUOS_BITS, WACOM_INTUOS3_ABS,
                  WACOM_INTUOS_REL, WACOM_INTUOS3_BUTTONS, WACOM_INTUOS3_TOOLS },
      /* 25 */ { "Wacom Intuos3 6x8",   10,  40640, 30480,  1023, 15,
                  wacom_intuos3_irq, WACOM_INTUOS_BITS, WACOM_INTUOS3_ABS,
                  WACOM_INTUOS_REL, WACOM_INTUOS3_BUTTONS, WACOM_INTUOS3_TOOLS },
      /* 26 */ { "Wacom Intuos3 9x12",  10,  60960, 45720,  1023, 15,
                  wacom_intuos3_irq, WACOM_INTUOS_BITS, WACOM_INTUOS3_ABS,
                  WACOM_INTUOS_REL, WACOM_INTUOS3_BUTTONS, WACOM_INTUOS3_TOOLS },

      { NULL , 0 }
};

struct usb_device_id wacom_ids[] = {
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x00), driver_info: 0 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x10), driver_info: 1 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x11), driver_info: 2 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12), driver_info: 3 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20), driver_info: 4 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21), driver_info: 5 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22), driver_info: 6 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x23), driver_info: 7 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x24), driver_info: 8 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x30), driver_info: 9 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x31), driver_info: 10 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x32), driver_info: 11 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33), driver_info: 12 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34), driver_info: 13 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35), driver_info: 14 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41), driver_info: 15 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42), driver_info: 16 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43), driver_info: 17 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44), driver_info: 18 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45), driver_info: 19 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60), driver_info: 20 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13), driver_info: 21 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14), driver_info: 22 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03), driver_info: 23 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0), driver_info: 24 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1), driver_info: 25 },
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2), driver_info: 26 },

      /* some Intuos2 6x8's erroneously report as 0x47;
       * multiple confirmed examples exist. */
      { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47), driver_info: 16 },

      { }
};

MODULE_DEVICE_TABLE(usb, wacom_ids);

static int wacom_open(struct input_dev *dev)
{
      struct wacom *wacom = dev->private;
      
      if (wacom->open++)
            return 0;

      wacom->irq.dev = wacom->usbdev;
      if (usb_submit_urb(&wacom->irq))
            return -EIO;

      return 0;
}

static void wacom_close(struct input_dev *dev)
{
      struct wacom *wacom = dev->private;

      if (!--wacom->open)
            usb_unlink_urb(&wacom->irq);
}

static void wacom_reset(struct wacom* wacom)
{
      unsigned char edata[2], limit=0;
      #ifdef __JEJ_DEBUG
      printk(KERN_INFO __FILE__ ": Setting tablet report for tablet data\n");
      #endif

      /* ask the tablet to report tablet data. repeats until it succeeds */
      do {
            edata[0] = 2;
            edata[1] = 2;
            usb_set_report(wacom->usbdev, wacom->ifnum, 3, 2, edata, 2);
            usb_get_report(wacom->usbdev, wacom->ifnum, 3, 2, edata, 2);
      } while (edata[1] != 2 && limit++ < 5);
}

static void *wacom_probe(struct usb_device *dev, unsigned int ifnum, const struct usb_device_id *id)
{
      struct usb_endpoint_descriptor *endpoint;
      struct wacom *wacom;

      if (!(wacom = kmalloc(sizeof(struct wacom), GFP_KERNEL))) return NULL;
      memset(wacom, 0, sizeof(struct wacom));

      wacom->features = wacom_features + id->driver_info;

      wacom->dev.evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC) |
                  wacom->features->evbit;
      wacom->dev.absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE) |
                  BIT(ABS_DISTANCE) | BIT(ABS_WHEEL) | wacom->features->absbit;
      wacom->dev.relbit[0] |= wacom->features->relbit;
      wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) |
                  BIT(BTN_MIDDLE) | wacom->features->btnbit;
      wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | 
                  BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | 
                  BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2) |
                  wacom->features->digibit;
      wacom->dev.mscbit[0] |= BIT(MSC_SERIAL);

      #ifdef __JEJ_DEBUG
      printk(KERN_INFO __FILE__ ": Reporting max %d, %d\n",
            wacom->features->x_max, wacom->features->y_max);
      #endif

      wacom->dev.absmax[ABS_X] = wacom->features->x_max;
      wacom->dev.absmax[ABS_Y] = wacom->features->y_max;
      wacom->dev.absmax[ABS_PRESSURE] = wacom->features->pressure_max;
      wacom->dev.absmax[ABS_DISTANCE] = wacom->features->distance_max;
      wacom->dev.absmax[ABS_TILT_X] = 127;
      wacom->dev.absmax[ABS_TILT_Y] = 127;
      wacom->dev.absmax[ABS_WHEEL] = 1023;

      wacom->dev.absmax[ABS_RX] = 4097;
      wacom->dev.absmax[ABS_RY] = 4097;
      wacom->dev.absmin[ABS_RZ] = -900;
      wacom->dev.absmax[ABS_RZ] = 899;
      wacom->dev.absmin[ABS_THROTTLE] = -1023;
      wacom->dev.absmax[ABS_THROTTLE] = 1023;

      wacom->dev.absfuzz[ABS_X] = 4;
      wacom->dev.absfuzz[ABS_Y] = 4;

      wacom->dev.private = wacom;
      wacom->dev.open = wacom_open;
      wacom->dev.close = wacom_close;

      wacom->dev.name = wacom->features->name;
      wacom->dev.idbus = BUS_USB;
      wacom->dev.idvendor = dev->descriptor.idVendor;
      wacom->dev.idproduct = dev->descriptor.idProduct;
      wacom->dev.idversion = dev->descriptor.bcdDevice;
      wacom->usbdev = dev;
      wacom->ifnum = ifnum;

      INIT_LIST_HEAD(&wacom->event_list);
      init_MUTEX(&wacom->kwacomd_sem);

      endpoint = dev->config[0].interface[ifnum].altsetting[0].endpoint + 0;

      usb_set_idle(dev, dev->config[0].interface[ifnum].altsetting[0].bInterfaceNumber, 0, 0);

      FILL_INT_URB(&wacom->irq, dev, usb_rcvintpipe(dev,
                  endpoint->bEndpointAddress), wacom->data, wacom->features->pktlen,
                  wacom->features->irq, wacom, endpoint->bInterval);

      input_register_device(&wacom->dev);

      wacom_reset(wacom);

      printk(KERN_INFO __FILE__ ": input%d: %s on usb%d:%d.%d\n",
                  wacom->dev.number, wacom->features->name, dev->bus->busnum,
                  dev->devnum, ifnum);

      return wacom;
}

static void wacom_disconnect(struct usb_device *dev, void *ptr)
{
      unsigned int flags;
      struct wacom *wacom = ptr;
      if (wacom)
      {
            spin_lock_irqsave(&wacom_event_lock, flags);
            list_del(&wacom->event_list);
            INIT_LIST_HEAD(&wacom->event_list);
            spin_unlock_irqrestore(&wacom_event_lock, flags);

            /* Wait for kwacomd to leave this tablet alone. */
            down(&wacom->kwacomd_sem);
            up(&wacom->kwacomd_sem);

            usb_unlink_urb(&wacom->irq);
            input_unregister_device(&wacom->dev);
            kfree(wacom);
      }
}

static void wacom_events(void)
{
      struct wacom* wacom;
      unsigned int flags;
      struct list_head *tmp;

      printk(KERN_INFO "wacom_events\n");

      while (1)
      {
            spin_lock_irqsave(&wacom_event_lock, flags);

            if (list_empty(&wacom_event_list))
                  break;

            /* Grab the next entry from the beginning of the list */
            tmp = wacom_event_list.next;
            wacom = list_entry(tmp, struct wacom, event_list);

            list_del(tmp); /* dequeue tablet */
            INIT_LIST_HEAD(tmp);

            if (down_trylock(&wacom->kwacomd_sem) != 0) BUG(); /* never blocks */
            spin_unlock_irqrestore(&wacom_event_lock, flags);

            wacom_reset(wacom);

            up(&wacom->kwacomd_sem); /* mark tablet free */
      }
      spin_unlock_irqrestore(&wacom_event_lock, flags);
}

static int wacom_thread(void* pv)
{
      daemonize();
      reparent_to_init();

      /* Setup a nice name */
      strcpy(current->comm, "kwacomd");

      /* Send me a signal to get me die (for debugging) */
      while (!signal_pending(current))
      {
            wacom_events();
            wait_event_interruptible(kwacomd_wait, !list_empty(&wacom_event_list));
      }

      complete_and_exit(&kwacomd_exited, 0);
}


static struct usb_driver wacom_driver = {
      name:       "wacom",
      probe:            wacom_probe,
      disconnect: wacom_disconnect,
      id_table:   wacom_ids,
};

static int __init wacom_init(void)
{
      int pid;

      usb_register(&wacom_driver);
      info(DRIVER_VERSION " " DRIVER_AUTHOR);
      info(DRIVER_DESC);

    pid = kernel_thread(wacom_thread, NULL,
                  CLONE_FS | CLONE_FILES | CLONE_SIGHAND);

    if (pid >= 0)
      {
            kwacomd_pid = pid;
            return 0;
      }

    /* Fall through if kernel_thread failed */
    usb_deregister(&wacom_driver);
    err("failed to start wacom_thread");

    return -1;
}

static void __exit wacom_exit(void)
{
    int ret;

      /* Kill the thread */
      ret = kill_proc(kwacomd_pid, SIGTERM, 1);
      wait_for_completion(&kwacomd_exited);

      usb_deregister(&wacom_driver);
}

module_init(wacom_init);
module_exit(wacom_exit);

Generated by  Doxygen 1.6.0   Back to index